REPARAR Y REUTILIZAR TUS VIEJAS TABLAS DE SURF

 

Ideas to repair and reuse your old surfboards!

Surfing is a sport that is born in nature, it uses its water, its waves and its wind, and it is very important to respect these elements. Today we must, more than ever, be aware of our commitment to the sea and the environment and it is clear that we are becoming more and more aware of this aspect.

Every gesture counts; from giving new uses to our surfboards, to completely renewing them to continue using them or buying boards 100% made with recycled materials.

We leave you with ideas so you can give your surfboard a new life and you don't have to say goodbye to them:

How to renew your complete surfboard step by step?

It all starts with trimming, retouching, reshaping and changing the fins… but the process can get complicated along the way. So that you do it right, we indicate the steps to follow so that you can renew your old surfboards and that the result is perfect:

  1. Clean the entire surfboard: This will be useful to discover any faults it has, such as dents, cracks in the fiber, problems with the lamination… It will be easier if you remove the fins. Do it with a cloth and a scrub brush and see how much work you have ahead of you.
  2. Start sanding: Once you've cleaned your surfboard, you'll have a much clearer idea of ​​how damaged your board is and where the damage is.
  3. Remove the fiberglass: Do it with a suitable tool and only in those areas of the board where there are many bubbles or a lot of air accumulated between the fiber and the foam. Be careful not to remove any glass shards that are still attached to the foam of your surfboard.
  4. Use resin: There are many suitable for this type of arrangement, which you can use to fill in the part that has been left without fiber. Make sure it covers the entire area, including the edges. Let it dry overnight. You can also apply the resin on other fissures or cracks that you find in your board.
  5. Apply the fiber patches: When you have completely leveled your board, apply the fiberglass patches over the areas where you used the previously removed resin. Cover it with plastic and press against the fiberglass. When it's dry, remove the plastic.
  6. Gently sand the surface of your board: Make sure everything is level. Use another combination of special resin to fill and when it is dry, sand it again.
  7. Paint your board: Once it's remodeled, you can color it and get creative with it!

Next, we leave you a video where you can see how a table is renewed from scratch:

How to recycle the paraffin from my surfboard?

Another element that can also harm the environment is the paraffin in your board. To give this wax another use, we show you how you can extract it from your surfboard and what material you will need:

  • A brush for wax (paraffin).
  • 1 empty container preferably metal.
  • 1 clip.
  • 1/2 tablespoons of coconut oil.
  • 3 drops of food coloring (this is optional).
  • 1 hard silicone mould.

Steps to follow to extract paraffin from a surfboard:

REPARAR Y REUTILIZAR TUS VIEJAS TABLAS DE SURF

1. Remove old wax or paraffin from the surfboard:

Old paraffin is a problem. It adds weight to the board, loses grip and becomes useless. Ideally, we would remove the remains of paraffin every time we go surfing, but many times, due to laziness or impatience to get into the water, we postpone it and in the end a lot accumulates.

Removing the remains of the wax from your surfboard, it will not take you long.The first thing you should do is put your board in direct sunlight (if the day allows it). The paraffin will melt quickly. If the weather is not favorable and the sun is not shining, pour hot water on the board or use a hair dryer to heat the wax.

Simultaneously, start scraping the board with the edge of your paraffin brush. Set a pattern; either you start from the tail and go to the nose, or vice versa. Continue this process until you can clearly see the original color of your board.

Finally, apply a specific degreasing spray to the board for this purpose and clean the board until it is completely dry. If you don't have the spray at home, you can do it yourself; apply pure coconut oil on the board or sprinkle sand from the beach and remove every last grain with a wool towel.

2. Put the paraffin in the metal container:

Collect all the paraffin that you have removed from the table and put it in the container. You can add leftover wax scraps where you store your board, or even in the trunk of your car if that's where you're transporting it.

3. Boil water and add the tablespoon of coconut oil:

Bring water to a boil and put it in the pot with the wax. This way the wax will become liquid. When you have achieved that the wax is melted and the liquid has been created in your boat, add the coconut oil. Also add a few drops of food coloring, if you like, to give the wax a new look.

4. Finally, insert the wax into your chosen silicone mold. In this way, your wax will adapt to the shape of the mold and you will have a beautiful decorative candle made with recycled paraffin.

How to paint my surfboard?

REPARAR Y REUTILIZAR TUS VIEJAS TABLAS DE SURF

Painting your surfboard can be an incredible therapeutic exercise, because you can give your board a new personality in case you don't like its design so much anymore or the original color has faded a bit due to wear. Put your creativity into practice and say who you are through your board!

To paint your surfboard you will need:

  • Color painting
  • Permanent markers
  • Brushes of various thicknesses
  • Cardboards
  • Rag or kitchen paper
  • Hair dryer
  • Piece of rope
  • Anything that can be used to draw curves

Steps to paint my surfboard:

  1. The first step is to draw your designs on the cardboard. Use whatever tools you need to perfect the most difficult shapes, curves, or details in your design.
  2. The second step is to cut out the drawing shape from the cardboard.
  3. The third step is for you to start painting your board, with the help of a paintbrush or brush. This way you will be tracing the background of your design.
  4. The fourth step is the following: when you have established the background, you will have to fix the paint with the help of heat (you can use a hair dryer).
  5. The fifth step involves using permanent markers to outline the outline of the drawing. Use the templates that you have previously cut out, as well as other accessories that can help you perfect your design.

There are tons of options when it comes to paint you can use on your board. The most common are :

  • Water-based paints: They are diluted in water, hardly smell and are easy to use and clean. If your intention is to surf with it, it is best to protect the painted area with lacquer or varnish. In this section we can also include acrylic paints, temperas, inks and watercolors.
  • Solvent-based paints or enamels: It is the type of paint you would use to paint a garage door or a bicycle.This type of paint is usually more dangerous and difficult to use, but it has the advantage of being much more resistant
  • Aerosols: Although the main manufacturers are already launching water-based paint aerosols on the market, the most common is to find them with solvent. They are characterized by their speed of application and drying, and by the durability of the finish.

What other uses can I give my surfboard?

REPARAR Y REUTILIZAR TUS VIEJAS TABLAS DE SURF

Instead of throwing away your surfboard, why not integrate it into your room? You can place it vertically on your wall, as a mere decorative object, so that the memory of the waves you rode in the past is not completely erased.

If your house is decorated in a fresh, slightly vintage style, and exudes a spirit similar to the sea breeze, you can put the boards on the wall of the living room, bathroom or even the kitchen. Unlike other types of paintings or room decorations, which often tend to give an impersonal air to houses, and it seems that you are in a furniture store instead of the place where people really are, without decorations, put your surfboard as a decorative element, will give a refreshing and original air to your rooms, and of course, it will give it much more personality and you will feel more at "home", it will have your essence!

Another original idea is to turn it into a hanging shelf, tying the board well to the wall so it doesn't come off, or you can even turn it into a shelf. In this way, you will give your room a different and very practical style. You can dedicate that corner of your house to the world of surfing and the sea... surely you have shells and sand from the beach at home that you have been preserving year after year. Put them in a jar and put them on top of your table-shelf. If you have any photos of yourself or someone you love surfing, it's time to print them, frame them and place them next to the shell boat. You will create your little tribute to the waves from home!

Don't throw away the fins either! Use them as bookends. It is a very simple but very recurrent and visual idea. Take a stack of your favorite books and place them between your fins. They will be safe and they will be fulfilling a very useful function. When you bring visitors home, they will surely notice your idea!

Another very cool idea is that you turn the keels into coat racks to hang your clothes when you enter the house, or the keys... or the mask!

If you have an old wooden surfboard, you can keep the nose and after tweaking it a bit, you can turn it into a wall clock. Peculiar, curious, but surely cool, and, above all, different.

One of the coolest and easiest things you can do with your surfboard is turn it into a table. Imagine, on a Saturday, with friends in your living room, having an aperitif on a surfboard with legs. People will want to come back.

If you have more than one surfboard, and a double bed… Turn them into the headboard of your bed! You'll wake up feeling like you're somewhere in the tropics, warm and all day ahead to surf.

REPARAR Y REUTILIZAR TUS VIEJAS TABLAS DE SURF

Recycling polystyrene surfboards

Resurf Project is an ecological project whose objective is the reuse of polystyrene surfboards. We are facing the first project in the world that seeks to produce new surfboards using old or used boards that cannot return to the water as base materials. No matter the characteristics or the type of board, they are all valid: stand-ups, paddle surf boards, surf boards... Even body boards.

The “Resurf” project contributes to the protection of the environment in addition to directing the sliding sports sector towards a more sustainable area of ​​operation and production, which is necessary, since we operate on a sports field that represents a style of life with a particular relationship with the ocean and nature

Approximately 400,000 surfboards are produced in the world each year. However, when a board breaks, it is disposed of without giving it a second chance. In this way, 100% of the surfboards or bodyboards we use end up buried or incinerated.

Although polyurethane boards cannot be reused, polystyrene boards do offer this opportunity. These are the boards of surf schools, lifeguards, and also those of many practitioners of sliding sports.

In addition to giving new uses to our old boards to help the environment and be more aware that things do not stop working so quickly, there are initiatives that are responsible for creating surfboards using mainly recycled materials.

We leave you this impressive initiative below:

Gloria and Ángel Rodríguez Arnal are two young artists who created an open and undulating project 8 years ago, like waves. The name they gave it was `Connecting the corks´ -Connecting corks-.

The objective of this project is to offer clean alternatives, recycle and take advantage of wasted raw material. This is where the use of cork comes in: In Spain, more than 2,500 tons of cork stoppers are discarded every year. This material has ideal properties to become the core of surfboards.

When the plugs are recovered, they are classified by size, “each plug has its own personality and its place on the board”, and they are placed in hexagons to form the structure of the board, thus reducing the weight of the board. "A technique that we have learned directly from bees, nature is undoubtedly a great teacher in design and engineering," details the co-founder of the company.

More than 5 years ago, the team patented the first 100% Cork Blank. Thus was born the first alternative to an industry that was not manufacturing its products with sustainable materials, but with very unhealthy elements that generate a great environmental impact, far removed from the natural essence of the original surf. What a great and sustainable idea! Did you already know her?

REPARAR Y REUTILIZAR TUS VIEJAS TABLAS DE SURF

Now that you know the infinity of opportunities and options you have to contribute your grain of sand to the environment, and not only conserve, but also give your surfboard a second life, with which of all the ideas that we have offered you are you going to stay?

.

CAMISETAS
VER OFERTAS
SUDADERAS
VER OFERTAS
GAFAS DE SOL
VER OFERTAS
GAFAS DE ESQUIÍ
VER OFERTAS
GAFAS DEPORTIVAS
VER OFERTAS

TE REGALAMOS 30 EUROS GRATIS

¡Únete a nuestra Newsletter ahora para usarlos HOY!

* Promoción válida sólo para nuevos suscriptores